Map Extract

Companies House lead generation works when you treat the register as an identity source, not a contact list. Filter the free monthly snapshot or the public API by status, company type, SIC code, age and area, then match each company to its trading website and confirm the link before you contact anyone. The register tells you a company exists and what it says it does; it does not tell you where it trades, whether it is busy, or how to reach the right person.

This guide covers the free data products, the filters that matter, the registered office trap, website matching and checks, and the personal data cautions that come with director records. Each section links to a deeper guide in this series.

What Companies House data is good for (and what it is not)

The UK register is unusually open. Every limited company, LLP and several other entity types have a public record with a company number, legal name, status, registered office, incorporation date, SIC codes, filing dates and officers. That makes it a strong base for B2B prospecting in a way that most countries' registers are not.

It is good for:

  • Defining a market. Every active private limited company with SIC code 43220 (plumbing, heat and air-conditioning installation) in a postcode area is a precise, repeatable starting set.
  • Timing. Incorporation dates show new companies; accounts and confirmation statement dates show which companies are filing on time.
  • Exclusion. Dissolved, dormant and insolvent companies can be removed before they waste your effort.
  • Identity checks. A company number shown on a website footer is strong evidence that the site and the register record describe the same business.

It is not good for:

  • Contact details. There are no email addresses, phone numbers or website URLs on the register.
  • Trading location. The registered office is a legal service address, often an accountant's office.
  • Size or activity. Small companies file abridged or micro-entity accounts with little detail, and SIC codes are self-reported.
  • Sole traders and ordinary partnerships. They do not register at Companies House at all, so a register-only list misses a large part of the small business market.

Keep that split in mind and you will design a workflow that uses the register for what it does well.

The free data products and the API

Companies House offers several routes to the same core data. The right one depends on whether you need a whole market once a month, a filtered list today, or a live feed.

RouteWhat you getFreshnessCostBest for
Free Company Data Product (bulk CSV)Basic data for every live company: number, name, registered office, status, type, incorporation date, accounts and confirmation statement dates, accounts category, up to four SIC codes, previous names, URIMonthly, published within 5 working days of month endFreeBuilding a whole-market base and filtering it yourself
Advanced company search (website)Filtered search by name, registered office address, incorporation date range, status, SIC code, company type, dissolved dateLiveFreeQuick one-off lists and checking a filter before you automate it
Public data APICompany profile, officers, filing history, charges, PSCs, plus an advanced search endpointLiveFree with a registered API keyStatus checks, enrichment of a known list, daily filtered pulls
Streaming APIA long-running feed of changes across nine streams, including company information and filing historyNear real timeFree with a keyWatching new incorporations and status changes
Accounts data productElectronically filed accounts as XBRL or inline XBRLDaily and monthlyFreeFinancial signals where accounts are filed electronically

A few facts worth knowing before you start:

  • The bulk download is described by Companies House as "a free monthly snapshot of information for live companies on the public register". Dissolved companies are not in it. In November 2026 the single ZIP was 471 MB, also offered as seven parts of about 70 MB each. The unzipped CSV has more rows than Excel's limit of 1,048,576 per worksheet, so plan to use Power Query, a database or a script. The step-by-step method is in how to download and filter the Companies House bulk data.
  • The API's advanced search endpoint (GET /advanced-search/companies) accepts incorporated_from, incorporated_to, sic_codes, company_status, company_type, location and more, and returns up to 5,000 results per request through the size parameter.
  • The API allows 600 requests in a five-minute window. Past that you get 429 Too Many Requests until the window resets, and Companies House warns that applications that repeatedly exceed or try to get around the limits may be banned. Design your enrichment to pace itself.
  • The streaming API allows at most two concurrent connections per account and expects clients to back off for a minute after a 429. It is the cleanest route to daily new incorporations; see how to find newly incorporated companies every day.

The filters that matter

Most bad Companies House lists fail at the filtering stage. These are the fields that do the most work, in the order you should apply them.

1. Company status

Keep Active unless you have a specific reason not to. The bulk file only contains live companies, but "live" includes statuses such as liquidation, administration and active with a proposal to strike off. Each of those is a poor prospect for most offers. The bulk data download guide shows how to count the status values in your own copy before you filter.

2. Company type

Private limited companies and LLPs are the core of most B2B lists. Consider removing community interest companies, charitable incorporated organisations, overseas entities and registered societies unless your offer suits them. Company type also matters for the law: limited companies and LLPs are corporate subscribers under PECR.

3. SIC codes

SIC 2007 codes are five digits, grouped in 21 sections from A to U. A company can choose up to four. They are self-reported at incorporation and only change when the company updates them on a confirmation statement, so they drift. Use them to narrow a market, then confirm with keywords on the website. Our SIC codes for prospecting guide has a starter mapping of niches to codes and the synonyms to search alongside them.

4. Age

Incorporation date lets you set a minimum age (for example, at least two years old, so the company has filed accounts) or target the newest companies for start-up offers such as bookkeeping, insurance or websites.

5. Accounts category

The accounts category of the last filed accounts tells you a lot. DORMANT means the company told Companies House it had no significant transactions in the year. NO ACCOUNTS FILED usually means a young company. Micro-entity and small categories hint at size. Our guide to finding and excluding dormant companies shows the filter.

6. Geography

Postcode area or district from the registered office gives a rough location, with the caveat in the next section. For local service offers, treat it as a hint until a trading address confirms it.

Example filter set

A fictional agency, Northfield Digital, sells websites to trades in Greater Manchester. Its first-pass filter on the monthly snapshot might be:

FieldRule
Company statusActive
Company typePrivate limited company or LLP
SIC code (any of four)43210, 43220, 43290, 43320, 43330, 43341, 43390, 43910, 43999
Incorporation dateBefore 1 November 2024
Accounts categoryNot DORMANT, not NO ACCOUNTS FILED
Registered office postcode areaM, OL, BL, SK, WN

That gives a market list. It is not yet a lead list, because nothing in it says where these companies work or how to reach them.

Registered office vs trading location

The registered office is the address where official post and legal documents go. The Companies Act requires one; it does not require it to be where the business operates. In practice:

  • Many small companies use their accountant's address.
  • Formation agents and virtual office providers offer registered office services, so a single address can host hundreds or thousands of companies.
  • Some companies use a director's home address, which raises its own privacy concerns.

If you map registered offices you will see unnatural clusters in city centres and none in the industrial estates where your prospects actually work. The fixes:

  1. Flag high-density addresses. Count companies per registered office postcode and address line. Anything above a threshold (say 20) is a service address, not a trading location.
  2. Take the trading address from the business. The website contact page, structured data (LocalBusiness markup) or a maps listing gives the place where the company actually trades.
  3. Keep both. Store the registered office for identity and the trading address for geography. Never overwrite one with the other.

Matching a company to its website

This is the step that turns a register record into a contactable business. There are two directions.

Company-first: start from the register

You have a company and need its website. Search for the legal name plus town, strip "Limited" and "Ltd" variants, and look for candidate domains. Then confirm:

Evidence on the candidate siteStrengthNotes
Company number in footer, terms or privacy pageStrongUK companies must show their registered number on their website; a match is close to conclusive
Exact legal name (with "Limited") on legal pagesStrongWatch for similarly named companies
Registered office address on the siteMediumShared service addresses weaken this
Trading name similar to the legal nameWeakMany companies trade under a different name
Same town and matching servicesWeakSupporting evidence only

Accept a match on strong evidence, hold it for review on medium evidence, and reject or leave unmatched otherwise. Never force a match because a list needs filling.

Website-first: start from the site

You found a business through search or maps and want its register record. Look for the company number on the site; if it is there, fetch the company profile from the API and check that the status is active and the name agrees. If there is no number, search the register by legal name and confirm with the address. Map Extract's Companies House matching does both directions in bulk.

Checks after matching

  • Status. Re-check the company status before outreach; companies dissolve, enter liquidation or are struck off between monthly snapshots.
  • Website health. Parked or dead domains, redirects to unrelated sites and holding pages all mean the business may not be trading online. See how to spot parked and dead domains in a lead list.
  • Duplicates. Groups often share one website across several companies. Decide whether your record is the company or the brand.

Why new companies rarely match

A company incorporated last week usually has no website yet, or a holding page. Expect low match rates on the newest incorporations and either retry later or use a different channel such as post.

Personal data cautions for directors

The register publishes officers' names, service addresses, month and year of birth, nationality and occupation. It is public, but that does not make it free of data protection law. The ICO is explicit that details identifying a named individual are personal data "even if they are acting in their business capacity".

Practical rules:

  • Do not build a director contact list from the register. Officer data is published for transparency about who runs a company, not for marketing to individuals. If you need a named contact, take it from the company's own website, where it was published for business contact.
  • Minimise. If you do not need a director's name to make your offer, do not store it. A company-level record with a generic business address (such as hello@northfield-plumbing.example) is often all you need.
  • Lawful basis. Where you process named individuals, legitimate interests is the usual basis for B2B prospecting, and it needs a documented three-part test. Our legitimate interests assessment template covers it.
  • Transparency. Data you did not collect from the person triggers UK GDPR Article 14 duties to tell them where you got it, usually at first contact. The legitimate interests assessment template covers the privacy line that goes with it.
  • Right to object. Individuals have an absolute right to object to direct marketing. Keep a suppression list and honour it across campaigns.

This is general information, not legal advice. The ICO's B2B marketing guidance is the primary reference.

Contacting the companies you found

Once a company is matched and checked, the channel rules depend on what kind of subscriber you are writing to:

  • Limited companies and LLPs are corporate subscribers under PECR. You can send B2B marketing email without prior consent, but you must not hide your identity and must give a valid opt-out address. If you are unsure whether a recipient is a corporate subscriber, the ICO says to treat them as an individual.
  • Sole traders and some partnerships are individual subscribers. They need specific consent for marketing email, unless the soft opt-in applies. They will not be on the register anyway, but they will appear when you add maps or search sources. Our guide to PECR for corporate subscribers and sole traders explains the test.
  • Post is outside PECR, though UK GDPR still applies to named recipients.
  • Calls must be screened against the Corporate Telephone Preference Service for businesses.
  • Other countries differ. Germany generally requires prior consent for advertising email, including B2B. In the US, CAN-SPAM sets opt-out and identification rules rather than consent. If your list leaves the UK, check the rules for each country.

The pillar guide to UK cold email law and PECR covers wording, opt-outs and records in detail.

A repeatable monthly routine

  1. Download the new snapshot in the first week of the month.
  2. Filter by status, type, SIC codes, age, accounts category and area.
  3. Diff against last month: new companies, companies that left the file (dissolved or removed), and changed SIC codes or addresses.
  4. Match new and unmatched companies to websites, company-first.
  5. Check status through the API for anything you plan to contact this week.
  6. Enrich matched websites with public business contacts, services and trading address.
  7. Review held matches by hand.
  8. Contact through the right channel, with your identity, the source of the data and an opt-out.
  9. Suppress opt-outs and dissolved companies permanently.

How Map Extract helps

Map Extract is a Windows desktop app. Its Companies House matching workflow uses public data from Companies House (it is not affiliated with Companies House) and is built around the matching and checking steps above rather than around selling a list.

  • Both directions. Website-first processing uses a company number or name found on a site to look for a registry match. Company-first processing starts from registry data, discovers candidate business websites and checks the link before passing an accepted website to enrichment.
  • Snapshot import and status checks. You can import the monthly snapshot as a CSV or ZIP, and with your own free Companies House API key the workspace can check company status. A company missing from a later snapshot is not assumed closed.
  • Registered office kept apart from trading location. The two are stored separately, and status history is retained.
  • Inactive companies handled without losing history. Inactive entities can be excluded from discovery or held from publication; existing business history is not deleted.
  • Unmatched companies stay in staging. Nothing is forced onto a website to make a list look complete.
  • Website enrichment. Accepted websites go to the website data extractor, which reads public pages (respecting robots.txt), picks up company numbers, VAT numbers, public business contacts, structured data and site health signals, and records parked or blocked sites instead of treating them as data.
  • Wider discovery. The AI business finder can propose niches and locations from a plain-English brief, which you review before anything is saved; its suggestions are never stored as business facts on their own. The UK property intelligence workspace (beta) reads the Companies House stream with SIC targeting for property and trades work.
  • Outreach gate. If you later email from the bulk email sender, its permission check refuses inactive Companies House entities and states that "Corporate status alone is not approval": a permission record with a lawful basis and an opt-out route is still required.

What it does not do: it does not give you email addresses from the register (there are none), it does not decide your lawful basis for you, it does not guarantee that every company has a findable website or that every match is correct, and it is not a credit-checking tool. Review held matches before you rely on them.

Public business and social results the app collects are uploaded automatically to Map Extract's servers while it is licensed and running; the privacy notice explains this.

Key takeaways

  • The register is an identity and timing source; contact details come from the company's own website and listings.
  • Filter by status, type, SIC code, age, accounts category and area, in that order.
  • Never treat the registered office as the trading location; flag high-density service addresses.
  • Match company to website on strong evidence (company number or exact legal name), hold weaker matches for review, and leave the rest unmatched.
  • Director details are personal data. Minimise them, document a lawful basis and give an Article 14 notice where it applies.
  • Limited companies and LLPs are corporate subscribers under PECR: identify yourself and offer an opt-out in every message.

Frequently asked questions

Is Companies House data free to use for lead generation?

Yes. Companies House publishes a free monthly snapshot of live companies, free per-company pages and a free public data API that needs a registered key. The register is public, but data protection law still applies when a record identifies a person, such as a director's name. Treat company facts as free to use and personal details as data you must justify, minimise and explain.

Can I get email addresses or phone numbers from Companies House?

No. The register holds legal identity, status, registered office, SIC codes, filing dates and officers, but not email addresses, phone numbers or websites. To contact a company you need to find its trading website or another public business channel and confirm that it belongs to the same company, usually by matching the company number or legal name shown on the site.

Should I use the registered office address for prospecting?

Usually not on its own. Many registered offices belong to accountants, solicitors or formation agents, so one address can host hundreds of unrelated companies. The register does not record where a company actually trades. Use the registered office for identity and rough location only, and take the trading address from the company's website or listings once you have matched them.

Which Companies House filters give the best B2B leads?

Start with company status (active only), company type (private limited and LLPs), SIC codes for your niche, incorporation date to set a minimum age, and accounts category to drop dormant companies. Postcode area gives a rough geography. Each filter removes noise, but none proves the business is trading, so check a website or listing before you contact anyone.

Do I need consent to email a limited company I found on Companies House?

Under PECR, a limited company or LLP is a corporate subscriber, so you can send B2B marketing email without prior consent, provided you identify yourself and offer a working opt-out. If the address identifies a named person, UK GDPR also applies and you need a lawful basis such as legitimate interests. Sole traders and some partnerships have stronger protection. Other countries differ.

Sources

  1. Companies House data products (GOV.UK)
  2. Free Company Data Product download page
  3. Companies House developer hub
  4. Advanced search for a company (API reference)
  5. Companies House API rate limiting
  6. Streaming API overview
  7. SIC 2007 condensed list (Companies House)
  8. Choosing a SIC code for your company (Companies House blog)
  9. Business-to-business marketing (ICO)
  10. Advanced company search (Find and update company information)
  11. Companies House blog: using the advanced search function

Written by the Map Extract editorial team. Found an error? Email support@mapextract.uk and we will check and correct it. How we research guides: editorial policy.

Find Newly Incorporated UK Companies Every Day

Three free ways to list new UK companies registered today: advanced search by incorporation date, the API search endpoint and the streaming API, plus a routine.

8 min read

See it working on your own searches.

Start with one keyword, one location and a small limit. Review the records, then decide on a licence.

Top