Map Extract

Gmail's rules come in two tiers. Every sender must have SPF or DKIM, valid forward and reverse DNS, TLS, RFC 5322 formatting and a spam rate below 0.3%. Bulk senders, meaning domains that send close to 5,000 messages in 24 hours to personal Gmail accounts, must also have SPF and DKIM, DMARC, From alignment and one-click unsubscribe on marketing mail. Google says these guidelines do not apply to messages sent to Google Workspace accounts, so a small B2B sender writing to company domains is usually in the first tier only. Yahoo's rules follow the same pattern.

That said, meeting the bulk tier anyway is cheap and removes most authentication problems. This explainer separates what applies to whom, then gives a practical setup for a small B2B sender. It sits in our deliverability cluster under the cold email deliverability checklist.

All-sender rules versus bulk-sender rules

From Google's email sender guidelines and FAQ, and Yahoo's sender best practices:

RequirementGmail: all sendersGmail: bulk sendersYahoo: all sendersYahoo: bulk senders
SPF or DKIMRequired (either)Both requiredRequired (either)Both required
DMARCNot requiredRequired, p=none allowedNot required (strongly urged)Required, at least p=none, must pass
From alignmentNot requiredFrom domain aligned with SPF or DKIMNot requiredAligned with SPF or DKIM (relaxed is fine)
Forward and reverse DNS (PTR)RequiredRequiredRequiredRequired
TLSRequiredRequiredNot listedNot listed
RFC 5322 formatRequiredRequiredRFC 5321 and 5322RFC 5321 and 5322
Spam rateBelow 0.3%Below 0.3%, aim below 0.1%Below 0.3%Below 0.3%
One-click unsubscribeNot requiredMarketing and promotional messagesNot requiredMarketing and subscribed messages
Visible unsubscribe linkNot requiredRequired with one-clickNot requiredRequired
Unsubscribe processingNot statedRecommended within 48 hoursNot statedHonour within 2 days
Do not spoof Gmail FromAppliesAppliesn/an/a

Google added TLS to the requirements in December 2023 and both tiers have applied since 1 February 2024. Google's FAQ says that "starting November 2025, Gmail is ramping up its enforcement on non-compliant traffic", with temporary and permanent rejections, and that enforcement for new domains runs on an accelerated timetable.

How the 5,000 threshold is counted

The FAQ is specific:

  • Who counts: "any email sender that sends close to 5,000 messages or more to personal Gmail accounts within a 24-hour period".
  • What is grouped: "we count all messages sent from the same primary domain", so outreach.oakline-joinery.example and oakline-joinery.example add together.
  • How long it lasts: "Senders who meet the above criteria at least once are permanently considered bulk senders", and the status "doesn't have an expiration date".
  • What is excluded: "The Email sender guidelines don't apply to messages sent to Google Workspace accounts", and "sender requirements and Google enforcement apply only when sending email to personal Gmail accounts".

The last point is the one most articles skip. A UK B2B list is mostly company domains. Some are on Google Workspace, some on Microsoft 365, some on hosting providers. Mail to Workspace domains is not counted toward the threshold and is not covered by these guidelines (Workspace tenants have their own spam filtering, and administrators set their own policies). Mail to @gmail.com addresses, which in B2B usually means sole traders and very small businesses, is counted.

Two consequences:

  1. A cold sender writing to a few hundred businesses a day will almost never reach 5,000 personal Gmail recipients in 24 hours.
  2. The personal Gmail addresses on your list are the ones that matter for these rules, and they are also, under PECR, often individual subscribers who need consent or the soft opt-in. More on that below.

Yahoo does not publish a number. Its page lists bulk sender requirements as a separate category without defining the threshold, so treat the bulk tier as the safe default.

Spam rate thresholds and Postmaster Tools

The spam rate is the share of your mail delivered to the inbox that recipients mark as spam. Google's FAQ asks senders to "keep your user-reported spam rate below 0.1% and prevent it from reaching 0.3% or higher". Since June 2024, bulk senders above 0.3% are ineligible for mitigation (Google will not help with delivery issues), and they become eligible again when the rate stays below 0.3% for 7 consecutive days. Yahoo's limit is also 0.3%, and Yahoo notes that its spam rate "is calculated in our system based on mail delivered to the inbox".

Google Postmaster Tools is where you see your Gmail spam rate. You verify your domain with a DNS record, and the dashboards show spam rate, authentication results and a compliance status against the sender requirements. The catch for small senders: Postmaster Tools only shows data once you send enough daily volume to personal Gmail accounts. A low-volume B2B sender may see no data at all. That does not mean everything is fine; it means you need other signals, such as replies, bounces and complaints that reach you directly.

Cold email complains faster than newsletters, because nobody asked for it. At 0.3%, three complaints per thousand delivered messages are enough to cross the line. Volume and relevance are the controls: fewer, better-targeted messages.

One-click unsubscribe: what is in scope

The bulk tier requires one-click unsubscribe, but only for some mail:

  • Google: "One-click unsubscribe is required only for marketing and promotional messages", and "Transactional messages are excluded from this requirement". Bulk senders also need a clearly visible unsubscribe link in the body.
  • Yahoo: a List-Unsubscribe header that "supports one-click unsubscribe for marketing and subscribed messages", with the RFC 8058 POST method "highly recommended" and mailto acceptable, plus a visible link, honoured within 2 days.

RFC 8058 is the mechanism. The message carries:

List-Unsubscribe: <https://oakline-tools.example/u/7f3a9c2e>, <mailto:unsubscribe@oakline-tools.example?subject=unsubscribe>
List-Unsubscribe-Post: List-Unsubscribe=One-Click

The List-Unsubscribe header "MUST contain one HTTPS URI", the POST header must contain exactly List-Unsubscribe=One-Click, and both headers "MUST be covered by" a valid DKIM signature. The receiving mailbox sends an HTTPS POST to that URI when the recipient clicks unsubscribe; your server must not require cookies or a login and must not redirect.

Cold email sent one-to-one from an ordinary Workspace or Microsoft 365 mailbox usually cannot add these headers, and a low-volume sender is not required to. What every cold email does need, in the UK, is a clear way to opt out. A plain sentence works: "If you would rather not hear from me, reply 'no thanks' and I will not contact you again." Process those replies the same day. Senders who do need the headers can build both lines with the free List-Unsubscribe header generator.

What this means for a small B2B sender

Suppose a fictional consultancy, oakline-tools.example, sends 60 cold emails a day from three Workspace mailboxes to UK companies. Roughly a tenth of recipients use personal Gmail addresses.

QuestionAnswer
Is it a Gmail bulk sender?No. About 6 personal Gmail recipients a day, far below 5,000
Do the all-sender rules apply?Yes, for mail to personal Gmail: SPF or DKIM, PTR, TLS, format, spam rate
Do the rules apply to the Workspace recipients?Google's guidelines do not, but those tenants filter on authentication and reputation anyway
Is DMARC required?Not by these rules, but cheap and worth it
Is one-click unsubscribe required?No, but an opt-out line is required by UK law
Can it see Postmaster Tools data?Probably not at this volume

The sensible answer is to meet the bulk tier's authentication rules anyway and treat the opt-out line as mandatory.

Practical setup for a small B2B sender

  1. Use a dedicated outreach domain or subdomain. Keeps cold mail reputation separate from invoices and support. The deliverability checklist covers the setup.
  2. SPF: one record, the provider's include only, within 10 lookups. See SPF too many DNS lookups.
  3. DKIM: turn on custom DKIM for your domain in the Admin console (Workspace) or Defender portal (Microsoft 365).
  4. DMARC: v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.example. Move to quarantine once reports show only your own senders.
  5. Alignment: confirm in a test message's headers that header.from matches the DKIM d= domain.
  6. PTR and TLS: automatic with Workspace and Microsoft 365; check with your host otherwise.
  7. Opt-out line in every message and a suppression list used by every mailbox.
  8. Volume: tens per mailbox per day after warm-up; see the warm-up schedule.
  9. Postmaster Tools: verify the domain now so data appears if volume grows.
  10. Separate personal Gmail addresses in your list and check the subscriber type before contacting them.

Sender rules are about mailbox providers, not law. In the UK, according to the ICO's B2B guidance, PECR's email marketing rule does not apply to corporate subscribers, but you must identify yourself and give a valid opt-out address. Sole traders and some partnerships are individual subscribers and need consent or the soft opt-in, and a business using @gmail.com is quite likely to be one. Named addresses are personal data under UK GDPR, needing a lawful basis such as legitimate interests and privacy information. Other countries differ: Germany generally requires prior consent for advertising email, including B2B, and in the US the CAN-SPAM Act applies.

How Map Extract helps

The bulk email sender sends through your own SMTP mailboxes, so authentication depends on your domain and provider; Map Extract does not check or set SPF, DKIM or DMARC, and it does not add one-click List-Unsubscribe headers. It does enforce several of the behaviours that keep a small sender well inside these rules:

  • A message cannot send unless its plain text contains opt-out wording ("opt out", "unsubscribe" or "do not contact"), and only approved links may appear.
  • Suppression is applied to the audience and again before each send.
  • The marketing permission gate holds any recipient without a recorded lawful basis, documentary reference and opt-out route, which is where personal Gmail sole traders get caught before sending.
  • Caps per hour, day and month, a minimum delay, route ceilings and an optional warm-up ramp keep volume low per mailbox.
  • Bounces are read by IMAP and the campaign pauses itself at the bounce threshold (5% by default).

None of this guarantees inbox placement or a particular spam rate.

Key takeaways

  • All senders: SPF or DKIM, PTR, TLS, RFC 5322, spam rate under 0.3%.
  • Bulk senders (close to 5,000 a day to personal Gmail, per primary domain, permanent): add SPF and DKIM, DMARC, alignment and one-click unsubscribe for marketing.
  • Google's guidelines do not apply to mail sent to Google Workspace accounts.
  • Yahoo mirrors the rules without publishing a volume threshold.
  • Small B2B senders should meet the bulk authentication rules anyway and always include an opt-out.

Frequently asked questions

Do Gmail's bulk sender rules apply to cold email?

Some do for every sender: SPF or DKIM, valid forward and reverse DNS, TLS, RFC 5322 formatting and a spam rate under 0.3%. The stricter bulk rules apply once a domain sends close to 5,000 messages in 24 hours to personal Gmail accounts. Google says its sender guidelines do not apply to mail sent to Google Workspace accounts, so B2B mail to company domains is not counted.

How does Google count the 5,000 messages a day?

Google counts messages sent to personal Gmail accounts within a 24-hour period, and counts all messages from the same primary domain together, so subdomains add to the parent. A sender that meets the threshold once is permanently treated as a bulk sender; the status does not expire even if volume later falls. Mail to Google Workspace accounts is outside these guidelines.

Is one-click unsubscribe required for cold emails?

Google requires one-click unsubscribe only for marketing and promotional messages from bulk senders, and excludes transactional mail. Yahoo asks bulk senders to support one-click unsubscribe for marketing and subscribed messages and honour requests within two days. Most low-volume cold senders are not bulk senders, but every UK marketing email still needs a clear way to opt out.

What spam rate does Gmail allow?

Google asks senders to keep the user-reported spam rate shown in Postmaster Tools below 0.1% and never let it reach 0.3%. Bulk senders above 0.3% are not eligible for mitigation, and become eligible again only after staying below 0.3% for seven consecutive days. Yahoo also sets 0.3% as its limit, measured on mail delivered to the inbox.

What is the difference between Gmail and Yahoo sender requirements?

They are closely aligned. Both require SPF or DKIM, forward and reverse DNS and a spam rate under 0.3% for all senders, and SPF plus DKIM, DMARC at p=none or stricter, alignment and one-click unsubscribe for bulk senders. Google publishes a 5,000 a day threshold and scope; Yahoo does not publish a number for who counts as bulk.

Sources

  1. Google: Email sender guidelines
  2. Google: Email sender guidelines FAQ
  3. Google Postmaster Tools
  4. Yahoo Sender Hub: Sender best practices
  5. RFC 8058: Signaling One-Click Functionality for List Email Headers
  6. ICO: Business-to-business marketing
  7. Microsoft Learn: Set up DKIM to sign mail from your Microsoft 365 domain

Written by the Map Extract editorial team. Found an error? Email support@mapextract.uk and we will check and correct it. How we research guides: editorial policy.

See it working on your own searches.

Start with one keyword, one location and a small limit. Review the records, then decide on a licence.

Top