Map Extract

Google Maps stops at roughly 120 results per search on the website, and the Places API Text Search stops at 60. You cannot raise either cap for a single search, but you can run more, smaller searches: split the area into towns, postcode districts or grid cells, and split the category into its synonyms. Then remove duplicates, because overlapping searches find the same businesses more than once.

This is one step in the wider Google Maps lead generation guide, which covers choosing terms, enrichment and outreach.

Where the cap shows up

There are two different limits, and people often mix them up.

RouteLimit per searchDocumented?What you see
Google Maps website (search panel)About 120 listingsNo, observedThe list stops loading and shows "You've reached the end of the list"
Places API, Text Search (New)60 results across all pages, 1 to 20 per pageYesNo nextPageToken after the third page

Google's Text Search documentation says Text Search (New) "returns a maximum of 60 results across all pages, although this limit is subject to change", and that pageSize accepts "between 1 and 20". The website's 120 figure is not published by Google; it is widely reported by tool makers and users, for example in Apify's write-up on Places limits. Treat it as an observation that could change without notice.

Note that the end-of-list message also appears when a search simply has fewer matching businesses. Seeing it after 37 results is not the cap; seeing it at about 120 usually is.

Why one search per city misses businesses

A Maps search is a ranking, not a directory listing. Google returns the most relevant and prominent matches for the query and the map area, then stops. For "electrician in Bristol", the first 120 are dominated by well-reviewed firms near the centre. An electrician with eight reviews on the edge of the city may be ranked 300th and never appear.

Two things change that ranking:

  • The area. A search centred on one district ranks the businesses in that district. The firm that was 300th city-wide may be 15th in its own postcode district.
  • The term. A business whose primary category is "Electrical installation service" may rank low for "electrician" but high for its own category.

So the fix is more, narrower searches, each well under the cap.

Split by area

Pick the unit that suits the region.

MethodGood forWeakness
Towns and citiesMixed regions of separate townsBig cities still hit the cap; town names can be ambiguous (there are several Newports)
Postcode districts (LS6, BS3)UK cities and suburbsRural districts are large; some districts span two towns
Map grid cellsComplete coverage of a regionMore searches and more duplicates; needs a cell size that fits density

A practical order: start with towns, look at which searches hit the cap, and split only those into postcode districts or grid cells. Dense city centres may need a second split. The grid search guide explains how to choose cell size and zoom so dense areas are covered without flooding rural ones with duplicates.

Check that results really are in the area you asked for. A search for a small place name can drift to a larger town nearby, or Google may localise to your own network location. If more than a few results fall outside the area, treat the search as suspect; a city grid search keeps each search inside a small, known area.

Split by category and synonyms

Run each customer type as several terms:

  • Electricians: electrician, electrical contractor, electrical installation service, EV charger installer.
  • Accountants: accountant, bookkeeper, chartered accountant, tax adviser, payroll service.
  • Cafes: cafe, coffee shop, tea room, sandwich shop.

Each term ranks businesses by its own relevance, so a firm that is invisible for "accountant" in a busy district may top the list for "bookkeeper". Keep a column showing which term found each business. After one run you will see which synonyms add new businesses and which only add duplicates, and you can drop the latter next time.

A worked example (fictional)

The figures below are invented to show the method, not taken from a real run.

A fictional sales team wants every electrician in Bristol.

Round 1. One search, "electrician in Bristol", returns 120 listings and the end-of-list message. That is the cap, so the list is incomplete.

Round 2. The same term is run in 12 postcode districts.

SearchListings returnedHit the cap?
electrician in BS1120Yes
electrician in BS2120Yes
electrician in BS394No
electrician in BS481No
8 more districts40 to 110 each, 610 in totalNo
Total rows1,025

Round 3. BS1 and BS2 are split into grid cells and searched again, adding 260 rows. "Electrical contractor" and "EV charger installer" are then run across all districts, adding 900 rows.

Dedupe. That is 2,185 rows. Merging on place ID, then website domain, then phone number leaves (say) 540 distinct businesses. Compared with the 120 from round 1, the split searches found four and a half times as many electricians, and about three quarters of all rows were duplicates.

The two lessons: report distinct businesses, never raw rows; and stop splitting once a new round adds mostly duplicates.

Remove duplicates across overlapping searches

Overlap is not a bug; it is the price of coverage. Merge in this order:

  1. Place ID. Google says place IDs "uniquely identify a place", but also that "it is possible for the same place or location to have multiple different place IDs" and that IDs "may change over time". It catches most repeats, not all. See the place ID documentation.
  2. Website domain, after reducing it to the bare registrable domain.
  3. Phone number in +44 international form.
  4. Name plus postcode, with fuzzy matching, as a last resort.

Chains need care: ten branches of one firm share a domain and may share a phone number. Decide whether you want one row per business or per branch before merging. The full rules are in deduplicating business leads.

If you use the Places API

The same splitting applies, with a lower cap of 60. Text Search (New) accepts a locationRestriction, and Google's documentation says "results outside the specified area are not returned", which suits a grid of small rectangles. includedType biases results to a place type, and strictTypeFiltering returns only that type.

Read the Google Maps Platform Terms before building a lead database from the API. They say customers "will not export, extract, or otherwise scrape Google Maps Content for use outside the Services", including to "copy and save business names, addresses, or user reviews", and restrict caching. The API gives licensed access within those terms; it is not a licence to keep the data.

Do not hammer the site to get past the cap

Splitting a city into hundreds of searches means hundreds of requests. Run them at a measured pace. If Google starts showing a CAPTCHA or "unusual traffic" page, stop and slow down rather than pushing on; the unusual traffic guide explains what triggers it and what to do. Collecting Maps data with automated tools may breach Google's terms, so check the rules for your use before you scale up.

How Map Extract helps

  • One job per keyword and location. The Google Maps scraper pairs every saved term with every saved place, so splitting by synonym and district is a list, not a manual chore. Five terms and eight places create forty jobs per enabled platform. A result limit of zero takes everything each search returns.
  • Scroll to the end of the list. Each job scrolls the results panel until Google's end-of-list message appears, then opens every place card. Saved listing counts per job show which searches came back near the cap and need splitting.
  • Area grid. A map area can be divided into cells (25 km by default, adjustable) with a zoom per cell, for regions where town lists leave gaps.
  • Geography checks. If most sampled results fall outside the requested place, the job is flagged as wrong geography instead of being saved silently.
  • Identifiers for dedupe. Every Google listing keeps its place ID and CID, website domain and phone in E.164 form, and records from overlapping jobs are consolidated into master records.
  • Other maps. The same jobs can run on the Bing Maps scraper and Apple Maps scraper to find businesses Google does not rank.

What it does not do: it cannot make one search return more than the platform shows, and it does not guarantee that every business in an area is found. A CAPTCHA pauses work for you to handle manually. Third-party platforms may restrict data collection or automated actions. Before running a workflow, check the platform's rules and make sure you have permission for the actions you configure.

Public business and social results the app collects are uploaded automatically to Map Extract's servers while it is licensed and running; the privacy notice explains this.

Key takeaways

  • The website shows about 120 results per search (observed); the Places API returns at most 60 (documented).
  • A search that returns close to the cap is incomplete; split it by area or term.
  • Use towns first, then postcode districts or grid cells where searches hit the cap.
  • Run category synonyms; keep the ones that add new businesses.
  • Dedupe on place ID, domain, phone, then name plus postcode, and report distinct businesses.

Frequently asked questions

How many results does Google Maps show per search?

The Google Maps website loads roughly 120 listings for one search before showing 'You've reached the end of the list'. Google does not document this number, so treat it as an observed limit that can change. The Places API Text Search (New) is documented: it returns at most 60 results across all pages, 20 per page, and Google says that limit is also subject to change.

Can you remove the 120 result limit on Google Maps?

You cannot change how many results one search returns. What you can change is the number of searches. Smaller areas and narrower category terms each return their own top results, so together they reach businesses a single city-wide search hides. The cost is overlap: the same business appears in several searches, so you must remove duplicates afterwards.

How do I know if a Google Maps search has missed businesses?

Look at the count. If a search returns close to the maximum, around 120 on the website or 60 through the API, it was probably cut off and there are more businesses to find; split that area or term further. If it returns well under the maximum, it has likely reached the end of what Google will show for that query in that area.

Does zooming in on Google Maps show more results?

Zooming into a smaller area changes which businesses are ranked for that view, so a zoomed search often surfaces listings a wider view did not. It does not raise the cap for that one search. Systematic coverage comes from running many small-area searches, by postcode district or grid cell, rather than from zooming manually.

Sources

  1. Text Search (New), Places API, Google for Developers
  2. Place IDs, Google Maps Platform documentation
  3. Google Places API limits, Apify blog
  4. Google Maps Platform Terms of Service

Written by the Map Extract editorial team. Found an error? Email support@mapextract.uk and we will check and correct it. How we research guides: editorial policy.

Google Maps Lead Generation: The Practical Guide

How to find local business leads on Google Maps: pick terms and areas, beat the visible result cap, enrich websites, verify emails and stay within the rules.

13 min read

How to Find Businesses Without a Website

A method for web designers: find local businesses with no website on Google Maps, weed out false positives, add dead and parked sites, then pitch lawfully.

8 min read

See it working on your own searches.

Start with one keyword, one location and a small limit. Review the records, then decide on a licence.

Top